Making Brown Malt: I wanted to make brown malt by toasting 2-row brewers in the oven. I generally toast a pound of my malt for all my ales, but this would be a longer than normal toast. I used the information from Brian Richards's post on making brown malt with a slight modification. This method seemed to work well and the beer tastes and looks great.
- I started with 4lbs of 2-row split on two cookie sheets. I put the trays in the oven and then turned it on to 300ºF.
- I stirred turned the malt and switched the cookie sheets at 15 minutes. The oven was at 250º.
- At 30 minutes I turned the malt again and switched the racks. The oven was at 300º. I then turned the oven up to 350º.
- At this point, I turned the malt and switched the racks every ten minutes for another 30 minutes for a total of 1 hour in the oven.
- Then I pulled the sheets out and let the malt cool
Toasted brown malt on the left, untoasted 2-row Brewers on the right
Grain Bill:
- 10lbs 2-row Brewers (or pale)
- 3.5lbs brown malt
- 6oz Dark crystal malt L135 - I picked this up from Mike O'brien in Ypsilanti. It has an interesting raisin flavor. I also tasted some great homebrewed historical stouts and a "chips and salsa" brew that was strange and amazing durning that visit...
- 5.5oz Carapils crystal malt
The Boil: Added one ounce of Northern Brewer when the boil was reached. At 30 minutes I added 1/2 oz of cascade (from Heritage Hops). At 45 minutes I added another 1/2 oz cascade. Turned it off at 1 hour and added 1/4 oz centennial.
Cooled and pitched Safbrew-04. I've read that this yeast is a super fast starter that can cause problems, so I didn't make a yeast starter like I normally do and I put the fermenter on my back porch where it was slightly cooler. I had a quick start and no problems. This yeast is fast, it was done and almost totally settled out in 1 week. The beer tastes great. Now if could just find time to keg it... The OG was 1.058 and the final is 1.012.
5 comments:
Sure hope you are bringing some home at Thanksgiving!
I got it in the keg today, so it looks like I will be able to.
So how did the oven-roasted brown malt contribute to the flavor?
Great idea! Would you do anything differently now in making this recipe?
I am considering using this recipe to drop on the yeast cake of my recent Mild...
I don't have any left to taste (if that's any indication), but I wouldn't make any major changes to the beer. I was thinking about making it the same way again (but what fun is that...?). I might try using a higher percentage of brown malt, but mostly just to see what that will do. You could sub out the dark crysal malt for another crystal malt if you don't have any around to keep the body.
Post a Comment